Map Grid; Day/Night Mode - Bryton Rider 60 User Manual

Map Grid

You can customize your map page by displaying among 0 to 2 grids. Each grid allows you to
select your desired item from the various options.
1. In the Main page, tap the
2. Select Grid Display > Map Grid.
3. You can have different map page settings for the navigating or
not navigating status.
4. Select the number of grid display and tap OK.
5. Tap each grid to set up your preferred item.
For example, you set up a "Signpost" grid on your map page.
While you are riding, your map page will display as below
illustration.

Day/Night Mode

You can customize the display mode.
1. In the Main page, tap the
2. Select Grid Display > Day/Night Mode.
3. Tap the desired setting.
• Auto Mode: The automatic (day/night) mode is based upon
the current date and GPS position by which this navigator
calculates the exact sunrise and sunset time on the
particular day at the particular location. Using this
information, the navigator can automatically switch
between the color schemes a few minutes before sunrise,
when the sky has already turned bright, and a few minutes
after sunset before the sky gets dark.
• Day Mode: the color schemes of the day mode use bright
tint to keep the average contrast of the screen high.
• Night Mode: the color schemes of the night mode use dark
tint to keep the average brightness of the screen low.
30 Rider 60 User's Manual
icon to enter the Settings page.
icon to enter the Settings page.