Smart Lap; Smart Pause - Bryton Rider 60 User Manual

Smart Lap

With Lap feature, you can use your device to automatically mark the lap at a specific location
or after you have traveled a specific distance.
1. In the Main page, tap the
2. Select Bike Profile > Smart Lap.
3. Select the desired option and configure the necessary settings.
• by Distance: specify the distance of each lap.
• by Location: set your start point as the lap point.
Upon reaching the lap point, Rider 60 will automatically
mark the lap.
• Off: disable Lap feature.

Smart Pause

If the function is activated, the recording will be automatically paused once you
have encountered these obstacles (such as traffic lights, crosswalk, etc.) and it will be
automatically resumed once you start riding.
1. In the Main page, tap the
2. Select Bike Profile > Smart Pause.
3. Tap On to enable the function.
28 Rider 60 User's Manual
icon to enter the Settings page.
icon to enter the Settings page.