Altitude Calibration; Current Altitude; Other Position Altitude - Bryton Rider 60 User Manual

Altitude Calibration

Altitude is measured by air pressure. Since air pressure changes all the time, the calculated
altitude may look differently even for the same spot. Therefore, if you need to require
an absolute altitude during your ride, we recommend you to calibrate your Rider 60 at a
position where the altitude is known.

Current Altitude

1. In the Main page, tap the
2. Select Alt. Calibration > Current Altitude.
3. Enter the current altitude and tap

Other Position Altitude

You can enter the altitude for your most frequently visited places.
1. In the Main page, tap the
2. Select Alt. Calibration > Position 1, Position 2, Position 3,
Position 4, or Position 5.
3. Tap Altitude and enter the position altitude. Then tap
confirm.
4. Tap Edit Name and enter the new position name.
Then tap to confirm.
5. When going to this position, tap Calibration to calibrate the
set altitude.
icon to enter the Settings page.
to confirm.
icon to enter the Settings page.
to
Rider 60 User's Manual 31