Initial Setup; Step 1: Charge The Battery; Using The Power Adapter - Bryton Rider 60 User Manual

Step 1: Charge the Battery

Using the Power Adapter

Charge the Rider 60 for at least 4 hours before you start using it.
Warning:
This product contains a lithium-ion battery. See the Warranty and Safety Information guide
in the package for important battery safety information.
4
3
1
NOTE: Always keep the USB cover tightened when riding. If the screen appears foggy, please
place Rider 60 in a dry place for 2 days and wait until the moisture disappears.
The Rider 60 may come with different plug head(s) suitable in the country where you
purchased the device.
To use the plug:
3
2
1
4
6 Rider 60 User's Manual

Initial Setup

2
60
PAGE
LAP
1. Open the USB cover.
2. Connect the mini-USB end of the USB
cable to the mini-USB port of the Rider
60.
3. Connect the other end to the power
adapter.
4. Plug the power adapter to a wall outlet.
1. Pull up the default plug.
2. Press and hold the tab.
3. Insert the plug head.
4. Release the tab to lock the plug head and
push the plug down.