Table of Contents
Advertisement
NOTE:
•
To ensure the data accuracy, it is highly recommended that you adjust the barometer every
time before using your Rider 60.
•
If you are only interested in related altitude gain/altitude loss information, calibration may
not be required.
Alert
With the Alert feature, the Rider 60 beeps and displays a message to notify you if you exceed
or below your target goal.
NOTE: If you are not in training mode, the alert reminder would base on your Find & Go
alert setting.
Find & Go Alert
1. In the Main page, tap the
2. Tap Alert > Find & Go and select the desired sensor.
•
by Cadence: specify the maximum and minimum cadence amount in revolutions of the
crank arm per minute (rpm). Then tap Alert > On to enable the notification alert.
•
by Distance: specify your targeted distance. Then tap
notification alert.
•
by Speed: specify the maximum and minimum speed. Then tap
the notification alert.
•
by Time: specify your targeted riding time. Then tap
notification alert.
•
by Heart Rate: specify the maximum and minimum heart rate. Then tap
enable the notification alert.
by Cadence
32 Rider 60 User's Manual
icon to enter the Settings page.
by Distance
Alert > On to enable the
Alert > On to enable
Alert > On to enable the
Alert > On to
by Speed
Hide quick links:
Advertisement
Table of Contents
