Installing the Heart Rate Monitor Set
1
4
NOTE:
•
In cold weather, wear appropriate clothing to keep the heart rate belt warm.
•
The belt should be worn under the chest and directly on your body.
•
Adjust the sensor position to the middle part of the body (wear it slightly below the chest).
The Bryton logo shown on the sensor should be facing upward. Tighten the elastic belt firmly
so that it will not turn loose during the exercise.
•
If the heart rate belt is not used for a period of time, remove the sensor from the heart rate
belt to prevent the battery from running flat.
46 Rider 60 User's Manual
2
3
5
60
PAGE
LAP