Speed Source/Cadence Source - Bryton Rider 60 User Manual

6. If necessary, select Rescan.
After you pair the first time, your Rider 60 will automatically recognize the sensor each
time when it is activated. This process occurs automatically when you turn on the Rider
60 and when the sensor are activated and functioning correctly.
Sensor Status
active (a green light with a
specific sensor ID display)

Speed Source/Cadence Source

You can set sensor priority for speed or cadence source at Settings (
Speed Source/Cadence Source.
NOTE:
1.By default, your speed source would always come from priority 1 (GPS). It would only
switch to priority 2 (Speed Sensor) if GPS signal is lost. Similarity, it would switch to the
next priority if the previous one is not available.
2.If you would like to do indoor training, please set speed source from Speed Sensor or
Dual Sensor based on the one you would like to record your speed.
26 Rider 60 User's Manual
inactive
searching for
sensors
no sensor is detected
) > Bike Profile >