To customize your personal settings, tap the
Bike Profile
You can customize your bicycle(s) profile.
Sensors
You can set two bikes (Bike 1 or Bike2) on Rider 60. All of them can use the same speed
and/or cadence sensors. Or, each Bike can have a different settings for the speed and/or
cadence sensors.
Pairing the sensor
You must wear or install the sensors so that the data can be transferred onto your Rider 60.
Refer to Installing Heart Rate Monitor/ Installing Speed/Cadence Dual Sensor in Appendix
section for detailed instructions. The Rider 60 T Series has paired
the sensor for you. It will automatically detect the sensor when
the sensor is activated and functioning correctly. If you purchase
a sensor separately, you must pair it with Rider 60 in order to
connect your sensors with the device. To pair the sensor, do the
following:
1. Turn on the Rider 60.
2. Install or wear your sensors.
3. In the Main page, tap the
4. Select Bike Profile > Bike 1 or Bike 2 > Sensors.
5. Select the desired sensor and tap On to enable the sensor.
When the sensor is paired, a green light and a specific sensor
ID displayed.
Settings
Settings (1/2)
icon to enter the Settings page.
icon at the bottom of the main page.
Settings (2/2)
Rider 60 User's Manual
25