Configuring Ntp Server Settings - HIKVISION DS-7200-ST Series User Manual

User Manual of DS-7200-ST Series DVR
Enter the account information in the corresponding fields. Refer to the DynDNS settings.
1) Enter Server Address for NO-IP.
2) In the Device Domain Name text field, enter the domain obtained from the NO-IP website
(www.no-ip.com).
3) Enter the User Name and Password registered in the NO-IP website.
Figure 10. NO-IP Settings

Configuring NTP Server Settings

A Network Time Protocol (NTP) Server may also be set up on your DVR to maintain accurate current date and
time.
alarm shop
To set up an NTP server:
1. Click Menu > Settings > Network to enter the Network Settings menu.
2. Select the Advanced tab.
3. Click the Set button next to NTP to enter the NTP Settings menu, as shown in Figure 8.
Figure 8. NTP Settings Menu
4. Check the NTP checkbox to enable this feature.
5. Configure NTP settings:
•
Synchronize Interval: Time in minutes to synchronize with NTP server.
•
NTP Server: Address of NTP server.
Note:
The address can be set to the IP address or the Domain name. When the Domain name is used, please set
the DNS server address.
6. Click OK to save settings and exit the NTP Settings menu.
84