Setting Hdd Status - HIKVISION DS-7200-ST Series User Manual
Hide thumbs
Also See for DS-7200-ST Series:
- Quick operation manual (40 pages) ,
- User manual (101 pages) ,
- Quick operation manual (32 pages)
Table of Contents
Advertisement
User Manual of DS-7200-ST Series DVR
Figure 2. HDD Group Settings Menu
5.
Select OK to save settings and exit the Group Settings menu.
Note:
By default settings, all HDDs belong to group 1.
Setting HDD Status
You may change the behavior of your HDD by changing its status. The status of a HDD can be set to read-only or
read/write (R/W).
alarm shop
Setting HDD to Read-Only
A HDD can be set to read-only to avoid important recorded files from being overwritten when the HDD becomes
full.
To set a HDD to read-only:
1.
Click Menu > HDD to enter the HDD Management menu.
2.
Select HDD to be protected.
3.
Select the Property button to enter the Property Settings menu, as shown in Figure 3.
Figure 3. HDD Property Settings Menu
4.
Set HDD Status to Read-Only.
5.
Select OK to save settings and exit the current menu.
100
Advertisement
Table of Contents
