Configuring Pppoe Settings - HIKVISION DS-7200-ST Series User Manual
Hide thumbs
Also See for DS-7200-ST Series:
- Quick operation manual (40 pages) ,
- User manual (101 pages) ,
- Quick operation manual (32 pages)
Table of Contents
Advertisement
User Manual of DS-7200-ST Series DVR
Configuring PPPOE Settings
Your DVR also allows for Point-to-Point Protocol over Ethernet (PPPOE) access. To set up PPPOE access:
1.
Click Menu > Settings > Network to enter the Network Settings menu.
2.
Select the General tab, as shown in Figure 3.
Figure 3. Network Settings Menu
3.
Select the Advanced tab to enter the Advanced Network Settings menu, shown in Figure 4.
alarm shop
Figure 4. Advanced Network Settings
4.
Click the Set button beside PPPOE to enter PPPoE Settings menu, shown in Figure 5.
81
Advertisement
Table of Contents
