HIKVISION DS-7200-ST Series User Manual page 109

User Manual of DS-7200-ST Series DVR
Figure 5. Add User Menu
Enter information for new user, including User Name, Password, Level and User's MAC.
3.
4. The Level is the user level and is separated into two tiers.
•
Operator: By default, the Operator user level has the authority to configure two-way audio
in network settings and all parameters in channel settings.
•
Guest: By default, the Guest user can not configure network settings, but can configure the
local playback as well as the remote playing in channel settings.
If User's MAC is configured and enabled, the user may only access the DVR from that particular
5.
MAC address.
6. Select the Permission button to enter the Permission Settings menu, shown in Figure 6.
alarm shop
Figure 6. Permission Settings Menu
7. Configure permission for local settings under Local Permission tab. The local settings include:
•
Local Log Search: Search and view logs of DVR.
•
Local Configuration: Configure and restore parameters to factory defaults. Introduce
settings to or export settings from DVR.
•
Local Advanced Operation: HDD management (including the initialization and changing
the properties of a disk). Ability to update system firmware as well as to stop the relay output
•
Local Shutdown/Reboot: Shutdown or reboot the DVR.
8. Click on Network Permission tab to configure network permission settings, as shown in Figure
7. The network settings include:
Figure 7. Network Permission Settings Menu
•
Remote Log Search: Remotely view logs that are saved on the DVR.
108