HIKVISION DS-7200-ST Series User Manual page 71

User Manual of DS-7200-ST Series DVR
Figure 3. Motion Detection Area
5. Right click mouse or press the MENU button on the front panel to set the Motion Detection
Sensitivity, shown in Figure 4. Higher sensitivity value corresponds to higher sensitivity level.
alarm shop
Figure 4. Motion Sensitivity Settings
6. Click OK to return to the motion detection area settings interface.
7. Right click the mouse to select the Exit from the menu to return to the Advanced Camera Settings
menu.
8. Click the Handle button to enter the Exception Handle menu, shown in Figure 5.
Figure 5. Triggered Camera Settings
9. Select cameras to trigger for recording when motion is detected by checking the checkboxes under
the desired cameras.
10. Select the Schedule tab. Set the schedule you want motion detection to be enabled. Schedule can
be set for all week or any day of the week with up to 8 time periods per day.
Note:
After having configured the schedule, the DVR must be restarted for the new settings to take effect.
70