User Manual of DS-7200-ST Series DVR
•
Remote Configuration: Remotely configure parameters, restore parameters to factory
defaults and import settings to as well as export settings from DVR.
•
Remote Serial Port Control: Configure settings for RS232 and RS485 ports.
•
Remote Video Output Control: Configure settings for video output.
•
Two-way Audio: Permission to use two-way radio between the remote client and the DVR.
•
Remote Alarm Control: Remote alert or control the relay output of the DVR. Alarm and
exception settings must be configured properly to upload to host.
•
Remote Advanced Operation: Remotely manage hard disk drives (initializing and setting
properties for HDDs). Permission to remotely update system firmware and stop relay output.
•
Remote Shutdown/Reboot: Remotely shut down or reboot the DVR.
9.
Click on the Camera Permission tab to configure channel permission, as shown in Figure 8. The
channel settings include:
alarm shop
Figure 8. Camera Permission Settings Menu
•
Remote Live View: Select and view live video over the network.
•
Local Manual Record: Locally start and stop manual recording on any of the channels.
•
Remote Record Starting: Remotely start and stop manual recording on any of the channels.
•
Local Playback: Locally play recorded files that are on the DVR.
•
Remote Playback: Remotely play and download recorded files that are on the DVR.
•
Local PTZ Control: Locally control PTZ cameras.
•
Remote PTZ Control: Remotely control PTZ cameras.
•
Local Video Export: Locally backup recorded files from any of the channels.
10.
Click the OK button to save and exit menu.
Note:
If you forget the password to your DVR, contact your supplier with the serial number of your DVR to
obtain a secure code to reset your DVR.
Deleting a User
To delete a user from the DVR:
1.
Click Menu > Settings > User to enter the User Settings menu.
2.
Select user to delete.
3.
Click the Delete button to delete user.
4.
Click the OK button to exit menu.
Note:
No deletion is allowed for the Administrator.
109