Video Loss Detection - HIKVISION DS-7200-ST Series User Manual

User Manual of DS-7200-ST Series DVR
To trigger alarm outputs manually:
1. Click Menu > Manual Alarm to enter the Manual Alarm menu (Figure 13).
Figure 13. Manual Alarm Menu
2. Configure the following settings in the Manual Alarm menu:
• Trigger: Select an alarm from the list and click Trigger to trigger its output.
• Trigger All: Trigger all alarm outputs at once.
• Clear All: Stop all alarm outputs at once.
3. Select OK to return to the previous menu.
alarm shop

Video Loss Detection

Your DVR can be set up to detect video loss and trigger an action. To set up video loss detection:
1. Click Menu > Settings > Camera to enter Camera Settings menu, shown in Figure 14.
Figure 14. Camera Management Menu
2.
Select the Advanced tab.
3.
Select the camera to be configured with video loss detection.
4. Check the Video Loss Detection checkbox to enable this feature, as shown in Figure 15.
74