Navigate Ptz Menu; Configure Ptz Settings - HIKVISION DS-7604 User Manual

Navigate PTZ Menu

PTZ menus can be navigated through with either the mouse or the front panel/remote. For quick access to certain
PTZ settings, right clicking with the mouse in the display while in PTZ control mode will enter the PTZ settings
menu. This menu is shown in Figure 1.
Figure1. Mouse PTZ Settings Menu
The items that can be found on this menu include:
•
Camera: Select a PTZ camera.
•
Call Preset: Call a PTZ preset.
•
Call Patrol: Call a PTZ sequence.
•
Call Pattern: Call a PTZ pattern.
•
Patrol Setting: Enter PTZ sequence configuration menu.
•
Pattern Setting: Enter PTZ pattern configuration menu.
•
PTZ Setting: Enter PTZ setting menu.

Configure PTZ Settings

Settings for a PTZ camera must be configured before it is used. Before proceeding, verify that the PTZ and RS-485
of the DVR are connected properly.
To configure PTZ settings:
1. Click Menu > Settings > PTZ to enter the PTZ Settings menu, shown in Figure 2.
www.cctvireland.ie
64
shop@cctvireland.ie