HIKVISION DS-7200-ST Series User Manual page 16

User Manual of DS-7200-ST Series DVR
DS-7208HVI-ST, DS-7208HVI-ST/SE, DS-7208HFI-ST, DS-7216HFI-ST,
DS-7208HFI-ST/SE, DS-7216HFI-ST/SE:
Figure 10. DS-7208HVI-ST, DS-7208HVI-ST/SE, DS-7208HFI-ST, DS-7216HFI-ST, DS-7208HFI-ST/SE,
DS-7216HFI-ST/SE Front Panel
1. USB Interface: Connects USB mouse or USB flash memory devices.
2. Status Indicators:
•
POWER: the indicator lights in green when DVR is powered up.
•
READY: the indicator lights in green when the device is running normally.
•
STATUS: the indicator lights when the compound key switches to numeric/letter input
mode.
•
ALARM: the indicator lights in red when there is sensor alarm occurring.
•
HDD: the indicator flickers in red when HDD is reading/writing.
•
Tx/Rx: TX/RX indictor flickers green when network connection is functioning normally.
3. IR Receiver: operation by IR remote control.
4. Compound Buttons:
•
1 MENU: (1) Enter numeral "1"; (2) Access the main menu interface
•
2ABC/F1: (1) Enter numeral "2"; (2) Enter letters "ABC"; (3) The F1 button when used in a
alarm shop
list field will select all items on the list. In PTZ Control mode, it will turn on/off PTZ light.
•
3DEF/F2: (1) Enter numeral "3"; (2) Enter letters "DEF"; (3) The F2 button is used to cycle
through tab pages. It will also bring up the Channel & OSD Position settings.
•
4GHI/ESC: (1) Enter numeral "4"; (2) Enter letters "GHI"
(3) Exit and back to the previous menu
•
5JKL/EDIT: (1) Enter numeral "5"; (2) Enter letters "JKL"; (3) Delete characters before
cursor;
(4)Select the checkbox and ON/OFF switch; (5) Start/stop record clipping in playback
•
6MNO/PLAY: (1) Enter numeral "6"; (2) Enter letters "MNO";
(3) Playback, for direct access to playback interface
•
7PQRS/REC: (1) Enter numeral "7"; (2) Enter letters "PQRS"; (3) Manual record, for
direct access to manual record interface; manually enable/disable record
•
8TUV/PTZ: (1) Enter numeral "8"; (2) Enter letters "TUV"; (3) Access PTZ control
interface
•
9WXYZ/PREV: (1) Enter numeral "9"; (2) Enter letters "WXYZ"; (3) Multi-camera
display in view.
•
0/A: (1) Enter numeral "0"; (2) switch between input methods (upper and lowercase
alphabet, symbols and numeric input)
5. SHIFT: Switch of compound keys between the numeric/letter input and functional control.
6. Control Buttons:
•
Directional buttons: In menu mode, the direction buttons are used to navigate between
different fields and items and select setting parameters. In playback mode, the Up and Down
buttons are used to speed up and slow down record play, and the Left and Right buttons are
used to select the recording 30s forwards or backwards. In live view mode, these buttons can
be used to cycle through channels.
•
Enter: The Enter button is used to confirm selection in menu mode; or used to select
checkbox fields and ON/OFF switch. In playback mode, it can be used to play or pause the
video. In single-frame play mode, pressing the Enter button will advance the video by a
single frame. And in auto sequence live view mode, the buttons can be used to pause /
resume auto sequence.
15