Configuring Live View Display - HIKVISION DS-7200-ST Series User Manual

User Manual of DS-7200-ST Series DVR
Figure 3. Digital Zoom

Configuring Live View Display

Click Menu >Settings >Display to access the Live View display settings:
alarm shop
Figure 4. Display Settings
Configure the following settings for Live View Display:
•
Video Output: Select the video output mode to VGA or Main CVBS.
•
Mode: Set the live view display mode to be 1× 1, 2× 2, 3× 3, or 4× 4.
•
Dwell Time: Set the dwell time for camera switching when Start Auto-switch is selected in Live
View.
•
Camera Order: Set the camera order for display in the selected mode (See Setting Camera
Order).
•
Enable Audio Output: Enable/disable audio output for the selected video output.
•
Event Output: Select the port for event output to VGA or Main CVBS.
•
Event Dwell Time: Set the dwell time for event video display.
Notes:
1. You can select the Main Monitor or Aux Monitor from the right-click menu in live view mode.
2. DS-7200-ST will automatically detect whether this is VGA display connected or not.
3. When a VGA display is connected to DVR, the VGA will be used as the main video output, and all menu
operations are accessible by mouse, front panel or IR remote; the VIDEO OUT1 will be used as the spot
video output which only allows user to access the live view of the camera according to the configured CVBS
44