Navigate Ptz Menu; Configure Ptz Settings - HIKVISION DS-7200HVI-ST User Manual

Navigate PTZ Menu

PTZ menus can be navigated through with either the mouse or the front panel/remote. For quick access to certain PTZ
settings, right clicking with the mouse in a display while in PTZ control mode will enter the PTZ settings menu. This
menu is shown in Figure 1.
Figure 1. PTZ Settings Menu
The items that can be found on this menu include:
•
Camera: Select a PTZ camera.
•
Call Preset: Call a PTZ preset.
•
Call Patrol: Call a PTZ sequence.
•
Call Pattern: Call a PTZ pattern.
•
Preset Settings: Enter PTZ preset configuration menu.
•
Patrol Settings: Enter PTZ sequence configuration menu.
•
Pattern Settings: Enter PTZ pattern configuration menu.
•
PTZ Menu: Enter PTZ control menu.
•
PTZ Settings: Enter PTZ settings menu.

Configure PTZ Settings

Settings for a PTZ camera must be configured before it is used. Before proceeding, verify that the PTZ and RS-485 of
the DVR are connected properly.
To configure PTZ settings:
1. Click Menu > Settings > PTZ to enter the PTZ Settings menu, shown in Figure 2.
71