User Manual of DS-7200-ST Series DVR
Figure6. Schedule Settings
11. Select the Handle tab to configure exceptions handling. Exception trigger options will be
described in the next section (See Understanding Exception Trigger Options).
alarm shop
Figure7. Handle Settings
12. Click OK to complete motion settings for the selected camera.
You may now add a schedule to start recording when motion is detected (See Scheduling Recording).
Note:
The Trigger Alarm Output option is not available for DS-7200HVI-ST/SE, DS-7200HFI-ST/SE,
DS-7200HVI-ST/SN and DS-7200HFI-ST/SN models as they provide no alarm in/out.
Sensor Alarm Settings
Note:
This section is invalid for DS-7200HVI-ST/SE, DS-7200HFI-ST/SE, DS-7200HVI-ST/SN and
DS-7200HFI-ST/SN models as they provide no alarm in/out.
Recordings can also be triggered from an external relay alarm device. To set up sensor alarms:
1.
Click Menu > Settings > Alarm to enter the Alarm Settings menu, shown in Figure 8.
71