Chapter 2 Preparations
2.1.1
Preparation for installation
(1) Mounting for vertical
For vertical use of the server, set the stabilizer attached to the bottom of the server as instructed below.
Removing/installing the stabilizer
Removing the stabilizer
Release the lock lever and slide it in the direction of the arrow to remove.
Installing the stabilizer
Insert the tab of the stabilizer into the slot of the server as shown in the figure below.
Slots on side 2
Installing the stabilizer in
slot 1
102
Lock lever
Tabs
Installing the stabilizer in
slot 2
Express5800/T110i-S User's Guide
2. Installation and Connection
Slots on side 1
Tabs