Configuring External Alarm Input - HIKVISION Network Camera User Manual

User Manual of Network Camera
2. Check the Enable Video Loss Detection checkbox to enable the video loss
detection.
3. Click
arming schedule configuration is the same as the setting of the arming schedule for
motion detection. Refer to Step 2 Set the Arming Schedule for Motion Detection in
Section 5.6.1.
4. Check the checkbox to select the linkage method taken for the video loss alarm.
Audible warning, notify surveillance center, send email and trigger alarm output are
selectable. Please Step 3 Set the Alarm Actions for Motion Detection in Section 5.6.1.
5. Click

5.6.4 Configuring External Alarm Input

Steps:
1. Enter the Alarm Input Settings interface:
Configuration > Advanced Configuration> Events > Alarm Input:
2. Choose the alarm input No. and the Alarm Type. The alarm type can be NO
(Normally Open) and NC (Normally Closed). Edit the name to set a name for the
alarm input (optional).
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Video Loss
Figure 5-30
to edit the arming schedule for video loss detection. The
to save the settings.
38