Recording And Capturing Pictures Manually; Operating Ptz Control; Ptz Control Panel - HIKVISION Network Camera User Manual

14
User Manual of Network Camera
 Configuring remote recording in Section 6.2 Configuring Recording Schedule.
 Setting the image quality of the live video in Section 5.1 Configuring Local
Parameters and Section 5.4.1 Configuring Video Settings.
 Setting the OSD text on live video in Section 5.5.2 Configuring OSD Settings.

4.3 Recording and Capturing Pictures Manually

In the live view interface, click on the toolbar to capture the live pictures or
click to record the live video. The local saving paths of the captured pictures
and clips can be set on the Configuration > Local Configuration page. To configure
remote scheduled recording, please refer to Section 6.2.
Note: The captured image will be saved as a JPEG file in your computer.

4.4 Operating PTZ Control

Purpose:
In the live view interface, you can use the PTZ control buttons to realize
pan/tilt/zoom control of the camera.
Before you start:
To realize PTZ control, the camera connected to the network must support the PTZ
function or a pan/tilt unit has been installed to the camera. Please properly set the
PTZ parameters on RS-485 Settings page referring to Section 9.6 RS-485 Settings.

4.4.1 PTZ Control Panel

On the live view page, click to show the PTZ control panel or click to
hide it.
Click the direction buttons to control the pan/tilt movements.
PTZ Control Panel
Figure 4-3
Click the zoom/iris/focus buttons to realize lens control.
Notes:
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.