Configuring Pppoe Settings; Configuring Ddns Settings - HIKVISION Network Camera User Manual

User Manual of Network Camera
2. Set the HTTP port, RTSP port and HTTPS port of the camera.
HTTP Port: The default port number is 80.
RTSP Port: The default port number is 554.
HTTPS Port: The default port number is 443.
3. Click

5.3.3 Configuring PPPoE Settings

Steps:
1. Enter the PPPoE Settings interface:
Configuration >Advanced Configuration > Network > PPPoE
2. Check the Enable PPPoE checkbox to enable this feature.
3. Enter User Name, Password, and Confirm password for PPPoE access.
Note: The User Name and Password should be assigned by your ISP.
4. Click

5.3.4 Configuring DDNS Settings

Purpose:
If your camera is set to use PPPoE as its default network connection, you can use the
Dynamic DNS (DDNS) for network access.
Before you start:
Registration on the DDNS server is required before configuring the DDNS settings of
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Port Settings
Figure 5-9
to save the settings.
PPPoE Settings
Figure 5-10
to save and exit the interface.
22