Setting / Calling A Preset - HIKVISION Network Camera User Manual

User Manual of Network Camera
 There are 8 direction arrows ( ,
window when you click and drag the mouse in the relative positions.
 For the cameras which support lens movements only, the direction buttons are
invalid.
Button

4.4.2 Setting / Calling a Preset

 Setting a Preset:
1. In the PTZ control panel, select a preset number from the preset list.
2. Use the PTZ control buttons to move the lens to the desired position.
• Pan the camera to the right or left.
• Tilt the camera up or down.
• Zoom in or out.
• Refocus the lens.
3. Click to finish the setting of the current preset.
4. You can click
Note: You can configure up to 128 presets.
 Calling a Preset:
This feature enables the camera to point to a specified preset scene manually or
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
,
Descriptions of PTZ Control Panel
Table 4-2
Adjust speed of pan/tilt movements
Setting a Preset
Figure 4-4
to delete the preset.
, , , , ,
Description
Zoom in/out
Focus near/far
Iris open/close
Light on/off
Wiper on/off
One-touch focus
Initialize lens
15
) in the live view