Maintenance; Rebooting The Camera; Restoring Default Settings - HIKVISION Network Camera User Manual

User Manual of Network Camera
Or Configuration > Advanced Configuration> System > Device Information
In the Device Information interface, you can edit the Device Name.
Other information of the network camera, such as Model, Serial No., Firmware
Version, Encoding Version, Number of Channels, Number of HDDs, Number of Alarm
Input and Number of Alarm Output are displayed. The information cannot be
changed in this menu. It is the reference for maintenance or modification in future.

9.4 Maintenance

9.4.1 Rebooting the Camera

Steps:
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance:
2. Click

9.4.2 Restoring Default Settings

Steps:
1. Enter the Maintenance interface:
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Device Information
Figure 9-6
to reboot the network camera.
Reboot the Device
Figure 9-7
61