User Manual of Network Camera
2. Check the corresponding version checkbox (
,
3. Configure the SNMP settings.
Note:
The configuration of the SNMP software should be the same as the settings
you configure here.
4. Click
5.3.6 Configuring 802.1x Settings
Purpose:
The IEEE 802.1X standard is supported by the network cameras, and when the
feature is enabled, the camera data is secured and user authentication is needed
when connecting the camera to the network.
Before you start:
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
SNMP Settings
Figure 5-14
) to enable the feature.
to save and finish the settings.
25
,