Configuring Audio Settings; Configuring Image Parameters; Configuring Display Settings - HIKVISION Network Camera User Manual

User Manual of Network Camera
A higher frame rate is advantageous when there is movement in the video stream,
as it maintains image quality throughout.
Max. Bitrate:
Set the max. bitrate to 32~16384 Kbps. The higher value corresponds to the
higher video quality, but the higher bandwidth is required.
Video Encoding:
When the Stream Type of the camera is main stream, the Video Encoding
standard can be set to H.264 or MPEG4.
When the Stream Type of the camera is sub-stream, the Video Encoding standard
can be set to H.264, MJPEG.
I Frame Interval:
Set the I-Frame interval to 1~400.
4. Click to save the settings.

5.4.2 Configuring Audio Settings

Steps:
1. Enter the Audio Settings interface
Configuration > Basic Configuration > Video / Audio > Audio
Or Configuration > Advanced Configuration > Video / Audio > Audio
2. Configure the following settings.
Audio Encoding: G.711 ulaw, G.711alaw and G.726 are selectable.
Audio Input: MicIn and LineIn are selectable. Select MicIn to connect the
microphone and select LineIn to connect the pickup.
3. Click

5.5 Configuring Image Parameters

5.5.1 Configuring Display Settings

Purpose:
You can set the image quality of the camera, including brightness, contrast,
saturation, hue, sharpness, etc.
Note: The Display parameters vary depending on the camera model.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Audio Settings
Figure 5-19
to save the settings.
29