Configuring Snmp Settings - HIKVISION Network Camera User Manual

User Manual of Network Camera
(2) Click
Note: For the IP Server, You have to apply a static IP, subnet mask, gateway and
preferred DNS from the ISP. The Server Address should be entered with the
static IP address of the computer that runs the IP Server software.

5.3.5 Configuring SNMP Settings

Purpose:
You can use SNMP to get camera status and parameters related information.
Before you start:
Before setting the SNMP, please download the SNMP software and manage to
receive the camera information via SNMP port. By setting the Trap Address, the
camera can send the alarm event and exception messages to the surveillance center.
Note: The SNMP version you select should be the same as that of the SNMP
software.
Steps:
1. Enter the SNMP Settings interface:
Configuration > Advanced Configuration > Network > SNMP
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
to save the settings.
IPServer Settings
Figure 5-13
24