Configuring Live View Parameters - HIKVISION Network Camera User Manual

User Manual of Network Camera
when an event takes place.
For the defined preset, you can call it at any time to the desired preset scene.
In the PTZ control panel, select a defined preset from the list and click
preset.
 Linking to Alarm:
The preset can also be linked to the alarm input when there is an alarm event
occurring.
Please refer to Section 5.6.4 for the PTZ Linkage settings.

4.5 Configuring Live View Parameters

Purpose:
You can select the stream type and adjust the image size on the live view page.
Steps:
1. Click
interface to select the stream type as main stream or sub-stream for live viewing.
2. Click each tab
auto.
Note: Please refer to Section 5.4.1 Configuring Video Settings for more detailed
settings about video parameters.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Calling a Preset
Figure 4-5
PTZ Linking
Figure 4-6
or tab under the menu bar of the live view
to set the image size to 4:3, 16:9, original or
16
to call the