Configuring External Alarm Input - HIKVISION Network Speed Dome Camera User Manual

67
User Manual of Network Speed Dome
Figure 6-34 Tamper-proof Alarm
2. Check Enable Tamper-proof checkbox to enable the tamper-proof detection.
3. Set the tamper-proof area. Refer to Step 1 Set the Motion Detection Area in
Section 6.6.1 Configuring Motion Detection.
4. Click to edit the arming schedule for tamper-proof. The arming
schedule configuration is the same as the setting of the arming schedule for motion
detection. Refer to Step 2 Set the Arming Schedule for Motion Detection in Section
6.6.1 Configuring Motion Detection.
5. Check the checkbox to select the linkage method taken for the tamper-proof.
Notify surveillance center, send email and trigger alarm output are selectable. Please
refer to Step 3 Set the Alarm Actions for Motion Detection in Section 6.6.1
Configuring Motion Detection.
6. Click to save the settings.

6.6.3 Configuring External Alarm Input

Steps:
1. Enter the Alarm Input Settings interface:
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.