Configuring External Alarm Input; Hikvision Digital Technology Co., Ltd. All Rights Reserved - HIKVISION DS-2CD2132-I User Manual

User Manual of Network Camera

6.6.3 Configuring External Alarm Input

Steps:
1. Enter the Alarm Input Settings interface:
Configuration > Advanced Configuration> Events > Alarm Input:
2. Choose the alarm input No. and the Alarm Type. The alarm type can be NO
(Normally Open) and NC (Normally Closed). Edit the name to set a name for the
alarm input (optional).
3. Click
Set the Arming Schedule for Motion Detection in Section 6.6.1.
4. Check the checkbox to select the linkage method taken for the alarm input. Refer
to Step 3 Set the Alarm Actions for Motion Detection in Section 6.6.1.
5. You can also choose the PTZ linking for the alarm input if your camera is installed
with a pan/tilt unit. Check the relative checkbox and select the No. to enable
Preset Calling, Patrol Calling or Pattern Calling.
6. You can copy your settings to other alarm inputs.
7. Click
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Lo-Call 1890 866 900
Alarm Input Settings
Figure 6-29
to set the arming schedule for the alarm input. Refer to Step 2
to save the settings.
www.cctvireland.ie
59
shop@cctvireland.ie