Create The Plc-5C Program - Allen-Bradley ControlLogix User Manual

Port Number 2 is the ControlNet Port

Create the PLC-5C Program

1. Enter the following ladder program:
2. Double-click on Setup Screen in the MSG instruction.
The following window will appear.
3. Under the General tab in the message Setup Screen, enter the following
configuration:
In this field
This PLC
Communication Command
Data Table Address
Size in Elements
Port Number
Target Device
Data Table Address
MultiHop
4. Select the MultiHop tab in the Setup Screen.
PLC-5C to Logix5550 Controller: Unscheduled Messaging
Select
PLC5 Typed Write
S:23
1
2
N7:0
Yes
7-3
1756-6.5.3 - December 1999