From The Network Menu, Select Save As - Allen-Bradley ControlLogix User Manual

This new configuration line will appear.
For two-way communication
you can also configure the
PLC-5C to send messages to the
Logix5550 controller at this
time. See chapter 8 for details.
Logix5550 Controller to PLC-5C: Scheduled Communications
The Receive Scheduled Message configuration window will appear:
5. Enter the following parameters and click on OK.
In this field
Node Number
Slot Number
Tag
Requested Packet Interval
Message Size
(1)
This is the name of the tag created in RSLogix 5000.
A new configuration line in blue text will appear:
6. Click on the AutoMap All Entries button.
Input data will be mapped to a PLC5 file (e.g., N9:0).
Input data mapped to N9:0
7. From the Network menu, select Save.
Enter
1
0
(1)
produced_data
(use default)
2 (for DINT)
1756-6.5.3 - December 1999
6-13