Schedule The Network And Save The Configuration - Allen-Bradley ControlLogix User Manual

When RSNetWorx for ControlNet is finished surveying, the network
window should appear similar to that shown below.

Schedule the Network and Save the Configuration

1. From the Network menu, select Save.
The following pop-up window will appear:
2. Select "Optimize and re-write schedule for all connections" and click
on OK.
The network is now configured and scheduled, and the local controller is
able to communicate with the remote ControlNet devices.
Controlling I/O Over a ControlNet Network
1756-6.5.3 - December 1999
10-17