Test The Example Application - Allen-Bradley ControlLogix User Manual

9-6 PLC-5C to PLC-5C Unscheduled Messaging Over Two ControlNet Networks

Test the Example Application

Verify that the
AB_KTC-1 driver is
selected.
Verify that the Reply Timeout is
set to a minimum of 10 seconds.
1756-6.5.3 - December 1999
You will see a window similar to the following one.
5. Click on Yes to download the program.
It is not necessary to keep the existing Online ControlNet
configuration.
6. Go Online and put the processor in Run mode.
7. Minimize RSlogix5.
Perform the following steps to test the example application:
1. Start another session of RSLogix5.
2. From the Comms menu in RSLogix5 select System Comms.
The System Options window will appear with the System
Communications tab open.