Configure The Plc-5C To Receive Scheduled Messages; Rsnetworx For Controlnet Will Survey The Network For Connected; To That Shown Below - Allen-Bradley ControlLogix User Manual

Logix5550 Controller to PLC-5C: Scheduled Communications

RSNetWorx for ControlNet will survey the network for connected

devices. When it is finished, the network window should appear similar

to that shown below.

Configure the PLC-5C to Receive Scheduled Messages

1. Right-click on the PLC5 icon in the RSNetWorx window. The following
pop-up window will appear:
2. Select ControlNet Configuration.
6-11
1756-6.5.3 - December 1999