10-12
Controlling I/O Over a ControlNet Network
1756-6.5.3 - December 1999
Create the Ladder Logic Program
1. Double-click on Main Routine under the Main Program folder, and
enter the following program:
2. Save the program, using an appropriate name (e.g. "Remote_IO").
Download the Program
1. Click on the Communications menu and select Who Active.
2. The Who Active window will appear (Your window may look different
depending upon the drivers and other devices you have installed).
(1)
This example uses RSLogix5000 version 2.25. See Appendix D if you are using version 2.10 or earlier.
(1)