9-2
PLC-5C to PLC-5C Unscheduled Messaging Over Two ControlNet Networks
Create the Example Application
1756-6.5.3 - December 1999
Verify that the 1784-KTCX15 driver card is configured as described on
page 2-3.
Verify that all wiring and cabling is properly connected.
Perform the following steps to create the example application:
1. Start the RSLogix5 software
2. From the File menu, select New. The Select Processor Type window will
appear.
3. Enter the following information and click on OK.
In this field
Processor Name
Platform
Processor
Series
Revision
Driver
Processor Node
Ignore any prompts or warnings you receive about specifying
ControlNet project files. That is not necessary for this example.
Select
SENDER
ControlNet
(Enter your processor type)
(Enter your processor's series)
(Enter revision letter)
AB_KTC-1
11