PLC-5C to Logix5550 Controller: Scheduled Communications
Create the PLC-5C Program
1. Enter the following ladder program:
N10 is the Output File configured
in RSNetWorX for ControlNet.
The data will be sent to an integer
array of size 2 (PLC5_data) in the
Logix5550 processor.
2. From the Edit menu, select Verify Project.
3. Save the file.
Download the PLC-5C Program
1. From the Comms menu, select System Communications.
The System Options window will appear with the System
Communications tab open.
2. Select AB_KTC-1 as the Driver and click on Who Active.
8-19
1756-6.5.3 - December 1999