Test The Example Application - Allen-Bradley ControlLogix User Manual

Test the Example Application

Perform the following steps to test the example application:
1. Start the RSLogix5 software.
2. From the Comms menu in RSLogix5, select System Comms.
The System Options window will appear with the System
Communications tab open.
3. Select AB_KTC-1 as the Driver and click on the Who Active button.
The RSWho window will appear (Your window may appear different,
depending on the drivers and devices installed on your system).
Logix5550 Controller to PLC-5C: Unscheduled Messaging 5-7
1756-6.5.3 - December 1999