Installing The Plc-5C Controllers - Allen-Bradley ControlLogix User Manual

Installing the PLC-5C
Controllers
Install the PLC-5C controller in a 1771 I/O chassis.
PLC-5C Controller and 1771 I/O Chassis
Card Guides
1. Set the backplane switches in the I/O chassis so that you can download
the ladder logic programs in the example applications. Put switches 5
and 6 in the "on" position, and all of the others in the "off" position.
2. Set the PLC-5C ControlNet node addresses using the two 10-digit rotary
switches on top of the PLC-5C modules.
For the example applications use node addresses 11 and 16.
ControlNet PLC-5C controller's NET address = 11
20 20
30 30
10 10
40 40
00 00
50 50
60 60
90 90
80 80 70 70
3. Insert the PLC-5C into the 1771 chassis.
4. Connect the PLC-5C's ControlNet port to the ControlNet network.
See the ControlNet 1.5 PLC-5 Programmable Controller User
Manual, publication 1785-6.5.22, for further information.
Installing the ControlNet Network
Locking Bar
ControlNet Node Address Switches
Lift Ejector Tab
PLC-5/40C Controller
Battery
Connector
Battery
Cover
Battery
Switches 5 and 6 "on"
2 3
1
4
0
5
9 6
8 7
1756-6.5.3 - December 1999
2-9