Add The Remote I/O Modules To The I/O Configuration - Allen-Bradley ControlLogix User Manual

6. Click on the Finish button to accept the configuration. The remote
1756-CNB module should appear indented under the local 1756-CNB in
the I/O Configuration folder.

Add the Remote I/O Modules to the I/O Configuration

You must now add the remote I/O modules to the I/O Configuration List
under the remote 1756-CNB module.
In this example, you will add a a 1756-IB16 digital input module and a
1756-OB16I digital output module with standard configurations. Use these
steps as a guide if you are configuring different I/O modules for your
system.
This example application uses the I/O module default configurations. For
information on altering the default configurations see the ControlLogix
Digital I/O Module User Manual, publication 1756-6.5.8.
Add the Remote Digital Input Module
1. Right click on the remote 1756-CBN under the I/O Configuration folder
and select New Module.
Controlling I/O Over a ControlNet Network
1756-6.5.3 - December 1999
10-7