Schedule The Network Using Rsnetworx For Controlnet - Allen-Bradley ControlLogix User Manual

4-16 Logix5550 to Logix5550 Controller: Scheduled Communication
Schedule the Network Using
RSNetWorx for ControlNet
1756-6.5.3 - December 1999
Before scheduled communication can take place, you must run RSNetWorx
for ControlNet to schedule the network. Running RSNetWorx transfers
configuration data to networked modules and establishes a Network Update
Time (NUT) for ControlNet that is compliant with the desired
communication options specified for each module.
1. Start the RSNetWorx for ControlNet software:
2. From the Network menu, select New.
3. Check the Edits Enabled box and go Online.
The Browse for Network window will appear with a list of available
drivers. (Your list may appear different from that shown below, but you
should have the AB_KTC-1 driver configured as described in chapter 2.)