Installing The 1784-Ktcx15 Communication Interface Card - Allen-Bradley ControlLogix User Manual

2-2 Installing the ControlNet Network
Installing the 1784-KTCX15
Communication Interface Card
For detailed information on
installing the 1784-KTCX15,
refer to the ControlNet
Communication Interface
Card Installation Instructions,
publication number
1784-5.33.
1756-6.5.3 - December 1999
Perform the following steps to install the 1784-KTCX15 card in your
personal computer.
1. Set the card's base memory address location on switches S1 and S2.
2. Set the card's base I/O space address location on switch S3.
Address 240
We used the following settings:
Base I/O Space Address
Base Memory Address
Important: When deciding which addresses to use, remember that each
card in your computer must have a unique base memory
address and a unique base I/O space memory address. If
another card in the host computer is using one or both of the
selected addresses, you must change the card's switch settings
to an available address.
Consult with your IT/PC support group to find out if it is necessary to
change any of your computer's memory address or IRQ settings.
3. Insert the card in a vacant 16- or 32-bit ISA/EISA expansion slot.
240
D000:000