Table of Contents
Advertisement
Table 64. CP Activation and Activity Status
Field
Blocked Status
Authenticated
Users
The following buttons are available on the CP Activation and Activity page:
•
Block—Click Block to prevent users from gaining access to the network through the
selected captive portal.
•
Unblock—If the Blocked Status of the selected captive portal is Blocked, click Unblock
to allow access to the network through the captive portal.
•
Refresh—Click Refresh to update the screen with the most current information.
Viewing Interface Activation Status
The Interface Activation Status page shows information for every interface assigned to a
captive portal instance. Use the drop-down menus to select the portal or interface for which
you want to view information.
Figure 83. Interface Activation Status
Table 65
describes the fields on the Interface Activation Status page.
Description
Indicates whether authentication attempts to the captive portal are currently
blocked.
Use the Block and Unblock buttons to control the blocked status. If the CP is
blocked, users cannot gain access to the network through the CP. Use this
function to temporarily protect the network during unexpected events, such
as denial of service attacks.
Note: The Blocked Status is the operational status and not the configured
status. It does not persist over a reboot. By default, the status is unblocked.
Block and Unblock are only available when the CP operational status is
Enabled.
Shows the number of users that successfully authenticated to this captive
portal and are currently using the portal.
9 Configuring the Captive Portal
Viewing the Captive Portal Global Status
179
Advertisement
Table of Contents
