Console Installation; Place Console; Erect Antenna - Linear DEFIANT SSD Owner's Manual

6. CONSOLE INSTALLATION

PLACE CONSOLE

1
BOTTOM OF
CONSOLE
LOCKING SCREW
HOLE FOR WALL-
MOUNTING

ERECT ANTENNA

FREE ANTENNA FROM CLAMPS
POSITION ANTENNA IN
UPRIGHT POSITION
NOTE: Sensor signals must be able to reach
the Console.
NOTE: If you don't use the Wireless Keypad,
the Console should be easily accessible to
your usual entrance.
NOTE: Make sure the Console is in a place
where you can hear the alarm during the
night hours.
Locate the Console near a 115 VAC outlet
not controlled by a light switch.
Locate the Console within 8 feet of a
LOCKING SCREW
HOLE FOR
telephone outlet (for the optional Emergency
SECURING
TOP COVER
Dialer).
A cover locking screw is provided to lock
down the hinged top cover.
If desired, the Console can be mounted on
the wall with screws.
Free the antenna from the retaining clamps
and pivot it to the upright position.
When wall mounting the Console, pivot the
antenna so it points up when the Console is
mounted on the wall.
Try to centrally locate the Console.
Keep Console away from large metal
appliances.
Maximum sensor range is 400 feet
under ideal conditions.
When the Console is set in the Away
Mode, you have 45 seconds to switch to
Off Mode before the burglary siren sounds.
Optional remote external sirens (up to
150 feet from the Console) can be
used to make alarms louder and
remote their location.
A wall mount template is provided on
the back of the Quick Operation Guide.
NOTE: If monitoring by the central
station is desired, do not wall mount
until the Emergency Dialer is installed.
9