EXIT DELAY BEEPS
PROGRAMMING STEP #65
PROGRAM
0 FOR EXIT BEEPS OFF
1 FOR EXIT BEEPS ON
STORE PROGRAM
TEST SENSORS LIGHT
PROGRAMMING STEP #67
PROGRAM
0 FOR TEST SENSORS OFF
1 FOR TEST SENSORS ON
STORE PROGRAM
HOME AUTOMATION OUTPUT POLARITY
PROGRAMMING STEP #68
PROGRAM
0 FOR VOLTAGE WHEN OFF
1 FOR VOLTAGE WHEN ON
STORE PROGRAM
The factory setting causes the Console to
beep during Exit Delays.
Alternately, the Exit Delay beeps can be
silenced.
The Console will be silent after arming to the
Away Mode until the Exit Delay expires, then
a single "gong" tone will sound.
The Console must be in Learn Mode to
make this change.
Exit Learn Mode when all programming
changes are complete.
The factory setting causes the Console's
TEST SENSORS indicator to light every two
weeks.
Alternately, the TEST SENSORS light can be
disabled.
The Console must be in Learn Mode to
make this change.
Exit Learn Mode when all programming
changes are complete.
The factory setting causes the Console's
Home Automation Output to provide a
current limited voltage source when
activated.
Alternately, the Console can be programmed
so the Home Automation Output provides a
current limited voltage source when
deactivated.
The Console must be in Learn Mode to
make this change.
Exit Learn Mode when all programming
changes are complete.
29