Using The System At Home; Home Mode - Linear DEFIANT SSD Owner's Manual

11. USING THE SYSTEM AT HOME

HOME MODE

START HERE
(OPTIONAL)
YOUR
SECRET
CODE
1 GONG &
HOME
2 BEEPS
DONE
START HERE
HOLD
DOWN
HOME
1 GONG &
2 BEEPS
DONE
16
Use this mode when sleeping or when
anyone is staying inside.
Home Mode causes an instant alarm when
any perimeter sensor switched to INSTANT
is triggered.
Home Mode causes a delayed alarm when
any perimeter sensor switched to DELAYED
is triggered.
Alarm siren stops automatically after five
minutes and the system will remain armed.
Home Mode ignores all interior sensors
(optional interior motion detectors).
Arm to Home Mode by entering your secret
code, and pressing [HOME].
You can "Quick Arm" to Home Mode from
Off or Chime Mode by holding down the
[HOME] key for two seconds. (Quick arming
can be disabled; see the Advanced
Programming Section of this manual.)
When the system is armed to the Home
Mode, the Console will sound a "Gong" and
two "Beeps".
Enter your secret code and press [OFF] or
[CHIME] to disarm from Home Mode and/or
stop the alarm siren.
If an alarm has occurred, multiple beeps will
sound after disarming and the sensor light
for the sensor(s) that caused the alarm will
flash (switch to Off Mode again to stop
flashing alarm memory light).