Making A Sensor Interior - Linear DEFIANT SSD Owner's Manual

MAKING A SENSOR INTERIOR

START IN OFF
YOUR
SECRET
CODE
1 GONG &
5 BEEPS
SENSOR
NUMBER
FOR
INTERIOR
HOME
1 BING
AWAY
DONE
Motion detectors are automatically
programmed as interior sensors. Any other
sensor can also be programmed as an
interior sensor.
Interior sensors can only trigger an alarm
when the Console is in Away Mode.
The sensor must have already been learned
by the Console (see "Adding sensors to the
System" for details).
Start with the Console in Off Mode.
Enter your secret code and press the
[LEARN] button.
A "gong" and five "beeps" will sound.
The sensor status indicators will light for
each sensor programmed into the Console.
Enter the sensor number from 01-16 (you
must enter two digits, example: 5 = 05)
The sensor indicator light will flash for the
sensor number selected.
Press [HOME], 7, then [AWAY]. A "bing"
tone will sound.
Exit Learn Mode by holding the [OFF] button
for three seconds.
25